Speaking as a hardwood floor driller of yore, sometimes it is the only way short of removing an entire wall and who needs the walls out at Christmas? The good thing about hardwood is it also comes in dowel form so a hole is only there until the wall has to come out anyway.

But if you don't take the wall out at Christmas how do you get the tree in? I hope you're not suggesting lowering it through the hole in the roof, as that would entail making the hole needlessly large; normally said hole only has to accommodate the tree's upper span.

And just to show me, today I was required to drill one(1) hole in the exposed soleplate of the living room wall so I could finally address the "no ground connection" issue in the sockets we plan on plugging the brand-new, Mrs Stevie for the use of, 48 inch wide flat screen "smart" TV into.

Hidden text

I wonder if that was why the old Philips 27 inch CRT had a bendy picture all these years; do TV electric gubbins use the ground as a reference of some sort? I dunno. At least we no longer have a current carrying ground now I got the supply upgraded and a proper ground installed. The old ground strap used to work loose from the water pipes and it looked like we had an arc welder running down there. What?

Having made several careful calculations and measurements I sat on the basement stairs, carefully located the groundless cable with Mr Hand and felt the extra-long electrician's drill-bit into place (no line of sight, you see) and by dint of swearing and sheer stick-toitiveness I punched a 5/16ths hole one quarter inch away from the skirting board straight through our hardwood floor. Extra poignancy was lent to this fiasco by my only discovering the fact after feeding four feet of wire through the hole and wondering where it was all going as I couldn't see it in the hole I made in the stairwell wall to do all the wire-fu where no-one would see it. I could hear the wire scratching at the wall but couldn't find it through my access hole (which was perfectly aligned with the junction boxes, so one in the win column even if swamped by the floods of incompetence happening all around me).

The anti-handiman spirits are clearly in your pocket Dan. Well played, sir. Well played.

Now, having run sixty feet of green-clad wire from the socket back to the power distribution center

Hidden text

I could have lazed-out and run three feet of wire to the nearest circuit with a ground, but then I'd have disconnected that circuit at some point in the future when I'd long forgotten about the TV socket and that would be a juicing waiting in ambush the next time I fiddled with the TV hookup

I'm off out dowel shopping.

Clearly the answer is to manufacture flooring with a regular pattern of what appear to be little round inlays but which are in fact pre-installed dowels; when you need a hole you just tap one out.

(Stevie) "Dowel shopping" sounds like a euphemism for some dubious activity. Don't do it.

And the Flat Screen TV c/w HD cable TV hookup and integration into the WiFi has Mrs Stevie smiling and heaping me with compliments and thank-yous in between bouts of binge Netflix-ing.

Next up: re-introducing surround-sound via the miracle of the wireless soundbar and removing to another place of the DVD player that opens only to close before you can load or unload a disc.

[Dan Re: Pre-made knockouts in the floor] Where's the fun in that? More to the point, where's the clear opportunity to deploy The Rule? Admittedly, this time all I got out of it was a couple of new spiral saw bits "needed" to saw out the hole in the sheetrock (actually, I should pull the 66s and 99s on account of me not being able to come up with an alternative method of cutting such a close-fitting hole without serious danger of cutting the cable too. (A lie, I have a small circular saw made out of an angle grinder that would have done almost as good a job while at the same time posing perhaps the greatest hazard to the user I have ever personally seen in a commercially available tool, and that includes the gas-powered chain-saw mounted on a ten foot pole and that never-to-be-sufficiently-damned McCulloch weed-wacker))

If your new TV supports HDMI-CEC it should work well with your Raspberry Pi. I paid more than the price of a Pi just for a CEC dongle for my XBMC box, but boy is it nice, you can use the TV remote for everything and let all the others moulder in a drawer. (You can sort of achieve the same result with a smartphone or tablet, but then you have to use separate apps for the TV and XBMC, the Viera app is pants, and it's really unhandy to slide between screens to get to the various controls.) It helps if your soundbar is also CEC compatible and connected to the ARC port. It means I can turn off the TV and just listen to music streams on the sound bar. (For that I do need to use the tablet or phone.)

Now if only my supposedly fanless HTPC actually ran stably without a fan. Fear to click: my USB fan hack. (The two sticky-up things to the right are external antennas I bodged onto it because the factory wifi was rubbish and if I'm going to have a Linux box next to a window I'll make it an access point so I can listen to streaming radio while snipping things in the garden.)

eh?

Sorry, should have prefaced that with "[Stevie]".